Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2000 >> LeSabre V6-3.8L VIN K >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Relay/Fuse Center Replacement (Rear Fuse Block)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Relay/Fuse Center Replacement (Rear Fuse Block)




REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable from the battery.
2. Remove the rear fuse block cover.
3. Remove the positive battery cable nut (1) and cable from the rear fuse block.
4. Unclip the four retaining clips, lift up the electrical fuse block and turn the block over.
5. Remove the three connector screws, and remove all of the connectors from the fuse block.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

1. Install all of the connectors to the rear fuse block and hand start the bolts.

Tighten
Tighten the bolts to 6.6 N.m (58 lb in).

2. Install the rear fuse block into the base assembly ensuring all the clips engage.
3. Install the positive battery cable and nut (1) to the rear fuse block.

Tighten
Tighten the bolts to 15 N.m (11 lb ft).

4. Connect the negative battery cable from the battery.
pro multis · About Operation CHARM