Scan Tool Data Definitions - Body Control Module (BCM)

8 Digit GM Part Number: Scan tool displays: Part number - Display indicates the part number of the BCM.

Auxiliary Lighting: Scan tool displays: On/Off - Display indicates the state of exterior lighting demand request from the remote function actuator (RFA).

Battery Voltage: Scan tool displays: Volts - Display indicates the battery voltage input, 0 - 30 volts is the operating range.

Calibration ID: Scan tool displays: Number - Display indicates the 4 digit calibration ID of the BCM.

Courtesy Switch: Scan tool displays: On/Off - Display indicates the state of the input request from the courtesy lamp switch.

Inadvert. Power Output: Scan tool displays: On/Off - Display indicates the state of interior lamp power feed circuit

LCM Headlamp Sw. Status: Scan tool displays: On/Off - Display indicates the state of the headlamp switch.

Park Lamp Input: Scan tool displays: On/Off - Display indicates the state of park lamps.

PROM ID: Scan tool displays: number - Display indicates the 4 digit PROM ID of the DDM.

Theater Dimming #1: Scan tool displays: On/Off - Display indicates the state of the interior lamps Theater Dimming #1: Scan tool displays: On/Off - Display indicates the commanded state interior lamp ground.

Theater Dimming #2: Scan tool displays: On/Off - Display indicates the state of the interior lamps.

Theater Dimming #2: Scan tool displays: On/Off - Display indicates the commanded state interior lamp ground.