Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2000 >> Regal V6-3.8L SC VIN 1 >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Seat Horizontal and Vertical Drive Cable Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Horizontal and Vertical Drive Cable Replacement




Seat Horizontal and Vertical Drive Cable Replacement

Removal Procedure

1. Remove the power seat adjuster. Refer to Front Seat Adjuster Replacement (Front Seat Adjuster Replacement).





Important: Initial removal of the nut securing the motor support bracket is suggested to gain access to the cable connector at motor for the inboard passenger side or the outboard driver side rear vertical gearnut.


2. Remove the cables by squeezing the oblong connector at the motors and the vertical/horizontal actuators.
3. Carefully flex the cable and remove it from the motor and horizontal/vertical actuator.

Installation Procedure




1. Carefully flex the cables and install them to the motors and horizontal/vertical actuators.
2. Firmly push the oblong connector at the end of the horizontal and vertical drive cables into the motors.
3. Install the power seat adjuster. Refer to Front Seat Adjuster Replacement (Front Seat Adjuster Replacement).

pro multis · About Operation CHARM