Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2000 >> Regal V6-3.8L SC VIN 1 >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Traction Control Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Traction Control Switch: Service and Repair




REMOVAL PROCEDURE
1. Remove the front floor console trim plate.
2. Depress the retainers on each side of the traction control/heated seat switch.
3. Lift the traction control/heated seat switch from the front of the floor console trim plate.
4. Disconnect the electrical connector from the traction control switch.
5. Disconnect the electrical connectors from the heater seat switches.

INSTALLATION PROCEDURE
1. Connect the electrical connector to the traction control switch.
2. Connect the electrical connectors to the heater seat switches.
3. Position the traction control/heated seat switch to the front floor console trim plate.
4. Install the traction control/heated seat switch into the console trim plate pressing in until the retainers are fully seated.
5. Install the front floor console trim plate.
pro multis · About Operation CHARM