Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2000 >> Regal V6-3.8L SC VIN 1 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shifter A/T >> Service and Repair >> Range Selector Cable Lever Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Range Selector Cable Lever Replacement

Removal Procedure





1. Remove the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.
2. Remove the range selector lever cable for the automatic transaxle (A/T) from the A/T range selector lever.





3. Remove the A/T range selector lever nut.
4. Remove the A/T range selector lever.

Installation Procedure





1. Install the A/T range selector lever.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the A/T range selector lever nut.
Tighten
Tighten the A/T range selector lever nut to 20 Nm (15 ft. lbs.).





3. Install the A/T range selector lever cable to the A/T range selector lever.
4. Adjust the A/T range selector lever cable if necessary. Refer to Automatic Transmission Range Selector Cable Adjustment.
5. Install the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.
pro multis · About Operation CHARM