Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2000 >> Regal V6-3.8L SC VIN 1 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Mount >> Service and Repair >> Automatic Transmission Mount Frame Bracket Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Automatic Transmission Mount Frame Bracket Replacement

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the left front tire and wheel.
3. Remove the left engine splash shield.
4. Use floor stands to support the transaxle.
5. Remove the transaxle mount frame bracket to the transaxle mount lower nuts. Refer to Automatic Transmission Mount Replacement.
6. Remove the transaxle mount frame bracket nuts.
7. Remove the transaxle mount frame bracket bolts.
8. Remove the transaxle mount frame bracket.

Installation Procedure





1. Position the transaxle mount frame bracket to frame.
2. Install the transaxle mount frame bracket bolts.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the transaxle mount frame bracket nuts on the bolts.
Tighten
Tighten the transaxle mount frame bracket bolts to 58 Nm (43 ft. lbs.).
4. Install the transaxle mount frame bracket to the transaxle mount lower nuts. Refer to Automatic Transmission Mount Replacement.
5. Remove the support from the transaxle.
6. Install the left engine splash shield.
7. Install the left front tire and wheel.
8. Lower the vehicle.

pro multis · About Operation CHARM