Scan Tool Data Definitions

Scan Tool Data Definitions

Body Control Module (BCM)
Battery Voltage
Display indicates battery voltage. Measured in volts.

Brake Switch Input
Displays indicates ON when the brake switch is depressed.

Shift Lock Control Output
Display indicates ON when the shift lock control solenoid is ON.

Ignition 1
Display indicates ON when the ignition 1 input circuit of the module receives a battery signal from the ignition switch.

Remote Start
Display indicates the current status of the remote start request.

Powertrain Control Module (PCM)
Current Gear
Displays current gear position of the transmission

TCC Brake Switch
Displays ON or OFF status of the TCC Brake switch.

TR Sw. A/B/C/P
Displays LOW or HI for the state of each of the four inputs from the IMS. LOW displayed indicates a low voltage signal (0 volts) being monitored at the PCM. HI displayed indicates a high voltage signal (B+) being monitored at the PCM.