Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2006 >> Rainier AWD L6-4.2L VIN S >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Braking Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Braking Sensor/Switch: Service and Repair



BRAKE PEDAL POSITION SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the knee bolster trim panel.
2. Disconnect the brake pedal position sensor electrical connector.
3. Remove the brake pedal position sensor bolt.
4. Remove the brake pedal position sensor from the vehicle.

INSTALLATION PROCEDURE




1. Install the brake pedal position sensor to the vehicle.
2. Install the brake pedal position sensor bolt.

Tighten the bolt to 9 N.m (80 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Connect the brake pedal position sensor electrical connector.
4. Install the knee bolster trim panel.
pro multis · About Operation CHARM