Frame Contact Lift

LIFTING THE VEHICLE WITH A FRAME-CONTACT LIFT

FRAME-CONTACT LIFT AT THE FRONT OF THE VEHICLE

IMPORTANT: The front lift pads must not contact the rocker panels, the front fenders, the floor pan, or the stone guard moldings.




When lifting the vehicle with a frame-contact lift, place the front lift pads at the front longitudinal frame rails. This area may also be identified on the vehicle with an equilateral triangle.

FRAME-CONTACT LIFT AT THE REAR OF THE VEHICLE

IMPORTANT: The rear lift pads must not contact the rocker panels, the rear fenders, the floor pan, or the stone guard moldings.




When lifting the vehicle with a frame-contact lift, place the rear lift pads at the lift bracket. This area may also be identified on the vehicle with an equilateral triangle.