Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2006 >> Rendezvous AWD V6-3.6L VIN 7 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Intake
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Intake



CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT - BANK 1 (RIGHT) INTAKE

REMOVAL PROCEDURE
1. Turn the ignition OFF.




2. Remove the power steering pressure hose bracket nut and reposition the hose as necessary in order to gain access.
3. Disconnect the camshaft position (CMP) sensor electrical connector (2).




4. Remove the CMP sensor bolt.
5. Remove the CMP sensor.

INSTALLATION PROCEDURE




1. Install the CMP sensor.
2. Install the CMP sensor bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the CMP sensor bolt to 10 N.m (89 lb in).




3. Connect the CMP sensor electrical connector (2).
4. Install the power steering pressure hose bracket and nut as necessary.
pro multis · About Operation CHARM