Cylinder Head Assembly

Cylinder Head bolt - RH





Cylinder Head bolt - LH

Important: DO NOT reuse the old M11 cylinder head bolts.

Cylinder Head Bolt - M11
First Pass 45 Nm (33 ft. lbs.)
Final Pass 120 degrees

Cylinder Head Bolt - M8
First Pass 15 Nm (10 ft. lbs.)
Final Pass 60 Degrees





Intake Manifold
Upper-to-Cylinder Head Bolt - Long 23 Nm (17 ft. lbs.)
Upper-to-Cylinder Head Bolt - Short 23 Nm (17 ft. lbs.)
Upper-to-Lower Intake Manifold Bolt 23 Nm (17 ft. lbs.)
Lower intake manifold bolts 10 Nm (89 inch lbs.)

Exhaust Manifold
Bolt 20 Nm (15 ft. lbs.)
Heat Shield Bolt 10 Nm (89 inch lbs.)
Studs 6 Nm (4.4 inch lbs.)





Camshaft Bearing Cap Bolt - Left 10 Nm (89 inch lbs.)





Camshaft Bearing Cap Bolt - Right 10 Nm (89 inch lbs.)

Camshaft Intermediate Drive Sprocket Bolt - Idler Sprocket 58 Nm (43 ft. lbs.)