Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2007 >> Allure (CANADA) V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 149. Engine Prelubing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

149. Engine Prelubing



Engine Prelubing

Tools Required

* J-21867-6 Oil Pressure Adapter Fitting
* J 45299 Engine Preluber

Important: A constant and continuous flow of clean engine oil is required in order to properly prime the engine. Be sure to use an approved engine oil as specified in the owners manual.

1. Ensure a NEW oil filter is installed.




2. Remove the oil pressure sending unit from the oil filter adapter.
3. Install the J-21867-6.




4. Install the flexible hose to the adapter and open the valve.
5. Pump the handle on the J 45299 in order to flow a minimum of 1-1.9 liters (1-2 quarts) of engine oil. Observe the flow of engine oil through the flexible hose and into the engine assembly.
6. Close the valve and remove the flexible hose and adapter from the engine.

Notice: Refer to Fastener Notice.

7. Install the oil pressure sending unit.

Tighten the oil pressure sending unit to 20 N.m (15 lb ft).

8. Top-off the engine oil to the proper level.

pro multis · About Operation CHARM