Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2007 >> LaCrosse V6-3.8L >> Repair and Diagnosis >> Windows and Glass >> Windows >> Service and Repair >> Sealing Strip Replacement - Front Door Window Belt Outer
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Sealing Strip Replacement - Front Door Window Belt Outer



Sealing Strip Replacement - Front Door Window Belt Outer

Removal Procedure





Notice: refer to Paint Damage Notice.

1. Apply masking tape to the door and applique.
2. Lower the window to the full down position.
3. Remove the outside rearview mirror.
4. Remove the outer belt sealing strip screw (2) located at the rear of the door.




5. Release the front outer belt sealing strip retaining clip, by inserting a suitable flat-bladed tool to the front edge and lift upward.
6. Remove the outer belt sealing strip from the door.

Installation Procedure





Important: When installing the outer belt sealing strip align the molding to the holes properly before pressing the front into place.

1. Install the outer belt sealing strip to the door.

1. Insert the retaining clip for the outer belt sealing strip into the front hole of the door and push down firmly to lock in place.
2. Install the outer belt sealing strip to pinch-weld flange.

Notice: refer to Fastener Notice.

2. Install the outer belt sealing strip screw (2).

Tighten the screw to 2 N.m (18 lb in).

3. Install the outside rearview mirror.
4. Install the front door trim panel.
5. Inspect the window for proper operation.
6. Remove the masking.
pro multis · About Operation CHARM