Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2007 >> Lucerne V6-3.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 71. Engine Front Cover Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

71. Engine Front Cover Installation



Engine Front Cover Installation

Tools Required

J 45059 Angle Meter




1. Install the engine front cover gasket.




2. Install the engine front cover.
Align the cogs on the crankshaft sprocket with the cogs on the oil pump in the engine front cover.
3. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or the equivalent to the engine front cover bolt threads.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the engine front cover bolts.

Tighten the engine front cover bolts to 20 N.m (15 lb ft). Use the J 45059 to tighten the engine front cover bolts an additional 40 degrees.

5. Install the oil pan to engine front cover bolts.

Tighten the oil pan bolts to 14 N.m (125 lb in).

6. Install the oil filter.

Tighten the oil filter to 30 N.m (22 lb ft).




7. Install the crankshaft position (CKP) sensor.

Tighten the CKP sensor studs to 30 N.m (22 lb ft).




8. Install the CKP sensor shield.

pro multis · About Operation CHARM