Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2007 >> Lucerne V8-4.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 108. Ignition Coil Module Installation - Right Side
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

108. Ignition Coil Module Installation - Right Side



Ignition Coil Module Installation - Right Side





Notice: Refer to Fastener Notice.

1. Install the right spark plugs.

Tighten the spark plugs to 15 N.m (11 lb ft).




2. Apply a small amount of dielectric grease GM P/N 12345579, (Canadian P/N 1974984) to each spark plug boot (1) of the ignition coil assembly.




3. Install the ignition coil assembly.
4. Install the ignition coil assembly bolts (708) and ball studs (709).

Tighten the ignition coil assembly bolts (708) and ball studs (709) to 10 N.m (89 lb in).




5. Install the ignition coil assembly sight shield cover.




6. If equipped, install the fuel injector sight shield bracket.
7. Install the fuel injector sight shield bracket bolts.

Tighten the fuel injector sight shield bracket bolts to 10 N.m (89 lb in).

pro multis · About Operation CHARM