Disc Brake Component Specifications

Front Brake Rotors (16 in)
Rotor Diameter 303.0 mm (11.9 in)
Rotor Minimum Thickness 28.6 mm (1.126 in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Rotor Thickness (New) 30.0 mm (1.181 in)
Front Brake Rotor (17 in)
Rotor Diameter 323 mm (12.72 in)
Rotor Minimum Thickness 28.6 mm (1.126 in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Rotor Maximum Thickness Variation 0.025 mm (0.001 in)
Rotor Thickness (New) 30 mm (1.181 in)
Rear Brake Rotor
Rotor Diameter 292.00 mm (11.50 in)
Rotor Minimum Thickness 10.5 mm (0.413 in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Rotor Thickness (New) 12.00 mm (0.472 in)

* All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machine below this specification.

Pad Thickness
Replace the disc brake pads when the friction surface (3) is worn to within 0.76 mm (0.030 in) of the mounting plates.