Sunroof / Moonroof Module: Service and Repair

SUNROOF MODULE ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Remove the sunroof finishing lace.
2. Remove the headliner.




3. Remove the drain hoses.
4. Disconnect the electrical connectors.
5. Remove the 9 bolts retaining sunroof module.
6. Remove the module from vehicle.

INSTALLATION PROCEDURE




1. Install the module to the vehicle.




2. Loosely install the 9 bolts retaining the module to the roof.
Use a drill bit to align the 2 holes A and B.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the 9 bolts in the sequence shown to 9 N.m (80 lb in).

3. Connect the electrical connectors.
4. Install the drain hoses.
5. Install the headliner.
6. Install the finishing lace.
7. Synchronize the sunroof motor if necessary.