Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 2008 >> XLR V8-4.6L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Keyless Entry >> Keyless Entry Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Entry Module: Service and Repair



Remote Control Door Lock Receiver Replacement

Removal Procedure

1. Turn the ignition to OFF.
2. Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Trim Pad Replacement (Service and Repair) .




3. Remove the retaining screws from the remote control door lock receiver.
4. Remove the receiver from the I/P carrier in order to access the wire harness connection.
5. Disconnect the wire harness connector from the door lock receiver.
6. Remove the door lock receiver.



Installation Procedure





1. Connect the receiver connector and route the wire harness through the I/P carrier.
2. Line up the receiver with the hole on the retainer.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the retaining screws to the remote control door lock receiver.

Tighten the screws to 2.5 N.m (22 lb in).

4. Install the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement (Service and Repair) .
5. Perform the RCDLR programming and setup procedure. Refer to Control Module References (Programming and Relearning) for programming and setup information.


pro multis · About Operation CHARM