Preliminary Inspection

NOTE: Before making any adjustments affecting caster, camber, or toe-in, the following front end inspection should be made.

INSPECT
1. Tires for proper inflation pressure.
2. Front wheel bearings for proper adjustment.
3. Ball joints, tie rod ends, and relay rods. If excessive looseness is noted, correct before adjusting.
4. Wheels and tires for runout.
5. Vehicle trim heights. Any corrections must be made before adjusting caster, camber or toe-in.
6. Steering gear for looseness at the frame.
7. Shock absorbers for leaks or any noticeable noise.
8. Control arms or stabilizer bar attachments for looseness.
9. Alignment equipment. Follow the manufacturer's instructions.
10. Level of the vehicle. The vehicle must be on a level surface fore, aft, and transversely.