Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1997 >> Camaro V6-3.8L VIN K >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Adjustments >> Adjustment Using New Park/Neutral Position Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Adjustment Using New Park/Neutral Position Switch

Adjust
1. Place transmission control (805) in "NEUTRAL."
2. Tang (818) on park/neutral position switch (817) into slot on transmission control (805).
3. Park/neutral position switch screws (819) to transmission control (805).

Tighten
- Park/neutral position switch screws (819) to 2.2 Nm (19 lb in).

Important:
- If the park/neutral position switch screw holes will not align with the transmission control, verify the transmission control is in the "NEUTRAL" position. Do not rotate the park/neutral position switch. If the switch has been rotated and the pin is broken, the switch can be adjusted using the procedure under "ADJUSTMENT USING OLD PARK/NEUTRAL POSITION SWITCH."

4. Front floor console.
5. Negative battery cable.

Tighten
- Negative battery cable to 15 Nm (11 lb ft).
pro multis · About Operation CHARM