Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1997 >> Camaro V6-3.8L VIN K >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Blade >> Service and Repair >> Wiper Blade Assembly Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Blade Assembly Replacement









Remove or Disconnect
1. If wiper arm assemblies have not been removed, lift wiper arm assembly until it locks into service-up position.
IMPORTANT
^ Use care when removing or installing a blade assembly (8). Inadvertent bumping can cause the wiper arm assembly (6) to toggle back and strike the windshield.
2. Wiper blade assembly (8) from wiper arm assembly (6).
A. Squeeze the ends of the wiper blade assembly clip (J) together and remove wiper blade assembly (8) from inside radius of wiper arm assembly (6).
B. Bring wiper arm assembly (6) out through opening in wiper blade assembly (8).

Install or Connect
1. Wiper blade assembly (8) on wiper arm assembly (6).
2. Carefully lower wiper arm and blade assembly onto windshield.
3. Operate wipers and check for proper operation.

pro multis · About Operation CHARM