Gear Outlet Hose Replacement

REMOVE OR DISCONNECT
1. Position rags under pump to absorb oil.
2. Siphon fluid from reservoir.
3. Gear outlet hose from pump after sliding spring clamp back.
4. Line retainer (if applicable).
5. Gear inlet hose assembly from rack and pinion steering gear.
6. Gear outlet hose assembly from rack and pinion steering gear.
7. Gear outlet pipe and/or hose from vehicle.

INSTALL OR CONNECT
1. Gear outlet hose assembly into position on vehicle.
2. Gear outlet hose assembly to rack and pinion steering gear.
Tighten outlet hose assembly to 27 Nm (20 ft. lbs.).
3. Gear inlet hose assembly to rack and pinion steering gear.
Tighten hose assembly to 27 Nm (20 ft. lbs.).
4. Line retainer (if applicable).
5. Gear outlet hose to pump and hose clamp.

Important: Fill and Bleed air from system.

6. Inspect for leaks.