Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1997 >> Corvette V8-5.7L VIN G >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Lighting and Horns >> Daytime Running Lamp Control Unit >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Daytime Running Lamp Control Unit: Service and Repair

REMOVAL PROCEDURE

DRL Control Module (Canada): Removal Procedure:




CAUTION: Refer to Battery Disconnect Caution in General In formation.

1. Disconnect the negative battery cable.
2. Remove the driver knee bolster trim panel.
3. Disconnect both of the Connector Position Assurance (CPA).
4. Disconnect the DRL module electrical connectors.

DRL Control Module (Canada): Removal Procedure:




5. Remove the DRL module from the I/P center support bracket. Release the tabs, then pull down on the module to release.

INSTALLATION PROCEDURE

DRL Control Module (Canada): Installation Procedure:




1. Install the DRL module to the I/P center support bracket.
Align the module slots to the bracket tabs, then pull up to secure.

DRL Control Module (Canada): Installation Procedure:




2. Connect the module electrical connectors
3. Connect both the CPA.
4. Install the driver knee bolster trim panel.

Tighten
Tighten the negative battery cable boll to 15 N.m (11 lb ft).

NOTE: Refer to Fastener Notice in General Information.

pro multis · About Operation CHARM