Extension Housing Disassemble

^ Tools Required:
- J 26941 Bearing Race Remover
- J 23907 Slide Hammer
- Or Equivalent





1. Remove the reverse idler shaft bracket bolts.





2. Remove the following parts:
a. The reverse idler gear
b. The roller bearing
c. The reverse idler shaft





3. Remove the following parts:
a. The countershaft extension bearing race
b. The shim
c. The funnel
4. Remove the outer and inner output shaft seals (Pry out the seals with a suitable tool).





5. Remove the mainshaft bearing race retainer ring.

Important: Do not replace the bearing race unless inspection shows bearing race damage.

6. Remove the mainshaft bearing race using J 26941 and J 23907.