Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1997 >> Corvette V8-5.7L VIN G >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Blade >> Service and Repair >> Wiper Blade Element Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Blade Element Replacement

REPLACEMENT PROCEDURE

Wiper Blade Element Replacement: Replacement Procedure:




1. Remove the wiper blade assembly from the wiper.
2. The blade element (4) has two notches at one end which are engaged by the bottom claw (3) set of the blade assembly (1). At the notched end of the blade (2), pull the blade element from the blade assembly (1).

INSTALLATION PROCEDURE

Wiper Blade Element Replacement: Installation Procedure:




Replacement blade elements (2) have three plastic caps (1) which retain the two metal flexor strips. Do not remove these caps (1) before the element is installed.

Wiper Blade Element Replacement: Installation Procedure:




IMPORTANT: The heel end of the wiper blade assembly is the end nearest to the base of the wiper arm.

1. At the heel end of the blade assembly, slide the blade element, notched end last, into the blade claw sets (1). The plastic retainer caps will be forced off as the element is fully inserted.

Wiper Blade Element Replacement: Installation Procedure:




2. Be certain that the two element notches are engaged by the last claw set and that all the other claws (2) and (3) and properly engaged in the slots of the element (1) on both sides.
3. Install the wiper blade assembly on the wiper arm.
pro multis · About Operation CHARM