Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1997 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Caliper >> Service and Repair >> Replacement >> Caliper Bracket
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Caliper Bracket

WARNING: The bolts which attach caliper bracket to knuckle must be replaced anytime they become loose or are removed. In this application, tightening or loosening these special bolts which use an encapsulated thread compound, is not recommended. Failure to replace caliper bracket bolts after they have been loosened or removed may result in loosening of caliper to knuckle attachment, causing reduced vehicle braking ability, and may result in personal injury.

Caliper Bracket Mounting Points To Knuckle:





REMOVE OR DISCONNECT
1. Brake Caliper.
2. Caliper bracket bolts.
3. Caliper bracket.

Bolt Boots:




Removing Bolt Boots:





4. Bolt boots and bushings from bracket.
- Inspect bracket for cracks. Replace if necessary.

INSTALL OR CONNECT
1. Lubricated new bolt boots and bushings with silicone grease.
2. Bolt boots and bushings into caliper bracket.
3. Caliper bracket with bracket bolts.
- Tighten caliper bracket bolts to 185 Nm (137 ft. lbs.).
4. Caliper.

pro multis · About Operation CHARM