Audio Distortion - One or More Speakers

Audio Distortion - One or More Speakers

Diagnostic Fault Information

Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview

Special Tools Required

J39916-A CD Diagnostic Audio Kit

Circuit/System Testing

1. Turn ON the ignition, with the engine OFF and turn ON the radio. Adjust the fade and balance controls to mid range and Insert the CD from the J39916-A CD Diagnostic Audio Kit to identify the suspect speaker.

• Replace suspect speaker if distortion is found.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests

Speaker Replacement Reference