Sunroof / Moonroof Weatherstrip: Service and Repair

SUNROOF FINISHING LACE REPLACEMENT

REMOVAL PROCEDURE




1. Beginning at the joint on the rear center of the sunroof opening, pull the sunroof finishing lace from the sunroof window track assembly.
2. Remove the sunroof finishing lace from the track assembly.

INSTALLATION PROCEDURE




1. Position the end of the sunroof finishing lace at the center of the rear center of the sunroof opening.




2. Push the finishing lace (2) onto the track assembly flange (1) until fully seated around the sunroof opening.
3. Pull the finishing lace draw cord toward the sunroof opening. Remove the cord from the periphery of the opening.
4. Ensure that the finishing lace (2) is properly seated over the outer surface of the headliner (3).