Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Cobalt L4-2.4L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Wiper and Washer Systems >> Wiper Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Control Module: Service and Repair



WIPER DRIVE SYSTEM MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the wiper arms.




2. Remove the air inlet grille panel.
3. Remove the fasteners (1) attaching the wiper module (2) to the plenum.
4. Disconnect the electrical connector from the wiper motor.
5. Remove the wiper module assembly from the plenum.

INSTALLATION PROCEDURE
1. Connect the electrical connector to the wiper motor.




2. Install the wiper module assembly into the plenum.

3. NOTE: Refer to Fastener Notice.

Install the fasteners (1) attaching the wiper module assembly (2) to the plenum.
Tighten the fasteners in sequence as shown to 10 N.m (89 lb in)
4. Install the air inlet grille panel.
5. Install the wiper arms.
pro multis · About Operation CHARM