Pickup Box Replacement

Pickup Box Replacement

Removal Procedure

1. Disconnect the tail/turn signal lamp wiring connectors at the rear of the vehicle.
2. Remove the tail lamp assembly.
3. Open the fuel filler door.




4. Remove the fuel filler neck.
5. Remove the endgate.




6. Remove the pickup box fasteners (1) from the frame rails.
7. With the an assistant remove the box from the vehicle.

Installation Procedure

1. Align the pickup box on the frame rails.






Notice: Refer to Fastener Notice.

2. Loosely install the pickup box fasteners (1) to the frame rails.

Tighten the retaining bolts to the frame rail to 85 N.m (63 lb ft).

3. Install the endgate.




4. Fasten the screws and the push-pin around the fuel filler neck.
5. Close the fuel filler door.
6. Install the tail lamp assembly.
7. Connect the tail lamp wiring connectors at the rear of the vehicle.