Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Colorado 4WD L5-3.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Air Temperature Sensor ( Ambient / Intake ) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Temperature Sensor ( Ambient / Intake ): Service and Repair



Mass Airflow Sensor/Intake Air Temperature Sensor Replacement

Removal Procedure




1. Disconnect the electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
2. Remove the 2 screws securing the MAF/IAT sensor to the air cleaner assembly.
3. Remove the MAF/IAT sensor from the air cleaner assembly.

Installation Procedure

Notice:
* Handle the MAF sensor carefully.

* Do not drop the MAF sensor in order to prevent damage to the MAF sensor.

* Do not damage the screen located on the air inlet end of the MAF.

* Do not touch the sensing elements.

* Do not allow solvents and lubricants to come in contact with the sensing elements.

* Use a small amount of a soap based solution in order to aid in the installation.






Insert the MAF/IAT sensor into the air cleaner assembly.

Notice: Refer to Fastener Notice.

1. Install the 2 screws securing the MAF/IAT sensor to the air cleaner assembly.

Tighten the MAF/IAT sensor screws to 2.25 N.m (20 lb in).

2. Connect the electrical connector to the MAF/IAT sensor.
pro multis · About Operation CHARM