Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Warning Indicator Always On



Brake Warning Indicator Always On

Diagnostic Fault Information

Important: Always perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview

Circuit/System Description

The body control module (BCM) sees the park brake switch and brake fluid level switch input to grounded, it sends a serial data message to the instrument panel cluster (IPC) requesting illumination of the red brake indicator.


Circuit/System Testing

1. With the scan tool, select instrument panel special functions Lamp Test. Command the instrument panel lamps OFF. Verify brake lamp turns OFF.
* If the brake lamp does not turn OFF, replace the IPC.

2. Disconnect the park brake switch, with a scan tool observe park brake switch parameter. Verify parameter is reading ON.
* If parameter is OFF, replace the park brake switch

3. Test the signal circuit of the park brake switch for a short to ground. Verify no short is found.
* If short is found repair circuit.

4. Replace the BCM.

Repair Instructions

Important: Always perform the Diagnostic Repair Verification after completing the diagnostic procedure.

* Parking Brake Indicator Switch Replacement
* Refer to Programming and Relearning. Programming and Relearning