Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> HHR L4-2.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 63. Crankshaft Balancer Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

63. Crankshaft Balancer Installation



Crankshaft Balancer Installation

Tools Required

* EN-48585 Crankshaft Balancer Guide
* J 38122-A Crankshaft Balancer Holder
* J 45059 Angle Meter





Notice: Ensure both components are aligned correctly or serious engine damage will occur.

1. Install the crankshaft balancer into the end of the crankshaft.
Install the balancer onto the EN-48585. Use care to properly align the keyway and flats on the balancer with the oil pump drive.




2. Install the J 38122-A.

Notice: Refer to Fastener Notice.

Important: Always install a new crankshaft balancer retaining bolt and washer.

3. Install a new retaining bolt and washer. Use the J 38122-A and a breaker bar to prevent the crankshaft from rotating when tightening the bolt.

Tighten the bolt to 100 N.m (74 lb ft) plus 125 degrees using the J 45059.

pro multis · About Operation CHARM