Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> HHR L4-2.2L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Motor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Starter Motor: Service and Repair



Starter Motor Replacement

Removal Procedure




1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the starter solenoid nut (4).
4. Remove the positive/negative battery cable (3) terminal from the starter.




5. Remove the engine harness terminal (4) from the starter.
6. Remove the starter solenoid "S" terminal nut (6).
7. Remove the engine harness terminal (5) from the starter solenoid.




8. Remove the starter bolts.
9. Remove the starter.

Installation Procedure




1. Position the starter to the engine.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the starter bolts.

Tighten the bolts to 40 N.m (30 lb ft).




3. Install the engine harness terminal (5) to the starter solenoid.
4. Install the starter solenoid "S" terminal nut (6).

Tighten the nut to 3 N.m (27 lb in).

5. Install the engine harness terminal (4) to the starter.




6. Install the positive/negative battery cable (3) terminal to the starter.
7. Install the starter solenoid nut (4).

Tighten the nut to 17 N.m (13 lb ft).

8. Lower the vehicle.
9. Connect the negative battery cable.
pro multis · About Operation CHARM