Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Impala V6-3.5L >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Turn Signal Switch >> Service and Repair >> Turn Signal Switch Housing Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Turn Signal Switch Housing Replacement



Turn Signal Switch Housing Replacement

Removal Procedure




Caution: Refer to SIR Caution.

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the tilt head components.
3. Remove the turn signal and multifunction switch assembly only.
4. Slide the turn signal switch housing off of the steering column shaft assembly.

Installation Procedure





Important: The switch mounting bracket must be pressed firmly against the steering column tilt head.

1. Slide the turn signal switch housing onto the steering column shaft assembly.
2. Install the turn signal and multifunction switch assembly only.
3. Install the tilt head components.
4. Enable the SIR system. Refer to SIR Disabling and Enabling.

pro multis · About Operation CHARM