Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Impala V8-5.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Engine Block Heater >> Service and Repair >> Coolant Heater Cord Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Coolant Heater Cord Replacement



Coolant Heater Cord Replacement (RPO LS4)

Removal Procedure




1. Cut the tie strap attaching the coolant heater cord to the diagonal brace.




2. Cut the tie straps (1) attaching the coolant heater cord to the engine wiring harness.
3. Disconnect the coolant heater cord connection from the coolant heater.
4. Remove the coolant heater cord.

Installation Procedure

Notice: The heater cord must not touch the engine, hot pipes, manifold, or any moving parts. Route the cord to the left front of the engine compartment securing with tie straps as necessary to prevent damage.




1. Install the coolant heater cord.
2. Connect the coolant heater cord connection to the coolant heater.
3. Install NEW tie straps (1) attaching the coolant heater cord to the engine wiring harness.




4. Install a NEW tie strap attaching the coolant heater cord to the diagonal brace.

pro multis · About Operation CHARM