Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Malibu L4-2.2L >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Hose >> Service and Repair >> Washer Solvent Container Hose Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Washer Solvent Container Hose Replacement



Washer Solvent Container Hose Replacement

Removal Procedure

1. Open the hood.




2. Disconnect the solvent container washer hose from the windshield washer hose and disengage the hose from the solvent container clips.
3. Route the hoses downward to allow draining.
4. Drain the washer solvent from the washer solvent container.
5. Remove the fender liner.




6. Disconnect the washer hose and electrical harness from the washer pump.
7. Remove the solvent container washer hose from the washer solvent container.

Installation Procedure




1. Connect the solvent container washer hose to the washer pump.
2. Install the solvent container washer hose to the washer solvent container. Ensure that the hose is routed within the channel on the side of the washer solvent container and snapped into the retaining features on the container.
3. Route the hoses upward and into the solvent container clips.
4. Connect the washer hose and electrical harness to the washer pump.
5. Install the fender liner.




6. Connect the solvent container washer hose to the windshield washer hose.
7. Fill the washer solvent container with washer solvent.
8. Close the hood.
9. Inspect the washers for proper operation.
pro multis · About Operation CHARM