Timing Component Alignment Marks: Locations

Timing Component Alignment Marks




^ Using the EN-47719, fully collapse the tensioner, and place the tensioner retaining pin into the retaining hole (1).





^ Align the crankshaft timing mark (1) to the timing mark on the bottom of the timing chain tensioner (2).
^ Hold the camshaft sprocket with the timing chain hanging down and install the timing chain to the crankshaft gear.
^ Align the timing mark on the camshaft gear (3) with the timing mark on top of the timing chain tensioner (4).




^ Align the dowel in the camshaft sprocket with the dowel hole in the camshaft.
^ Draw the camshaft sprocket onto the camshaft using the mounting bolts.

Tighten the bolts 16 N.m (12 lb ft).