Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Malibu V6-3.9L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Body Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Control Module: Service and Repair



Body Control Module Replacement

Removal Procedure

1. Disconnect the negative battery cable.
2. Remove the right console trim panel.
3. Remove the body control module (BCM) screws.
4. Remove the BCM wire harness connectors.




5. Remove the BCM.

Installation Procedure




1. Install the BCM.
2. Install the BCM wire harness connectors.

Notice: Refer to Fastener Notice.

3. Install the BCM screws.

Tighten the screws to 2.5 N.m (22 lb in).

4. Install the right console trim panel.
5. Connect the negative battery cable.
6. For a new or remanufactured BCM, program the BCM. Refer to Body Control Module Programming and Setup. Programming and Relearning
pro multis · About Operation CHARM