Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Silverado Classic 1500 2WD V6-4.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Throttle Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Position Sensor: Service and Repair



THROTTLE POSITION SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the air cleaner outlet resonator.
2. Disconnect the throttle position (TP) sensor electrical connector (1).




3. Remove the TP sensor screws.

NOTE: The TP sensor is an electrical component. Do not soak the TP sensor in any liquid cleaner or solvent, as damage may result.




4. Remove the TP sensor.

INSTALLATION PROCEDURE




1. Install the TP sensor.Align the TP sensor with the throttle shaft.

2. NOTE: Refer to Fastener Notice.




Install the TP sensor screws.

Tighten the screws to 2 N.m (18 lb in).




3. Connect the TP sensor electrical connector (1).
4. Install the air cleaner outlet resonator.
pro multis · About Operation CHARM