Generator Control Module Coolant Radiator Hose Replacement

Generator Control Module Coolant Radiator Hose Replacement

Removal Procedure




1. Drain the generator control module (GCM) cooling system. Refer to Generator Control Module Cooling System Draining and Filling. Generator Control Module Cooling System Draining and Filling
2. Remove the lower fan shroud.
3. Remove the GCM coolant pump radiator hose (5) from the clip (6).




4. Remove the GCM coolant pump radiator hose (3) from the clip.
5. Reposition the GCM coolant pump radiator hose clamp (2) from the GCM coolant pump (1).
6. Remove the GCM coolant pump radiator hose (3) from the GCM coolant pump (1).
7. Remove the GCM coolant pump radiator hose (3) from the vehicle.

Installation Procedure




1. Install the GCM coolant pump radiator hose (3) to the vehicle.
2. Install the GCM coolant pump radiator hose (3) to the GCM coolant pump (1).
3. Position the GCM coolant pump radiator hose clamp (2) to the GCM coolant pump (1).
4. Install the GCM coolant pump radiator hose (3) to the clip.




5. Install the GCM coolant pump radiator hose (5) to the clip (6).
6. Install the lower fan shroud.

Notice: The procedure below must be followed. Improper coolant level could result in a low or high coolant level condition, causing starter/generator control module damage.

7. Fill the GCM cooling system. Refer to Generator Control Module Cooling System Draining and Filling. Generator Control Module Cooling System Draining and Filling