Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Suburban 4WD V8-5.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Speed Sensor >> Service and Repair >> Transfer Case Rear Output Shaft Speed Sensor Replacement - Left Side
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transfer Case Rear Output Shaft Speed Sensor Replacement - Left Side



Transfer Case Rear Output Shaft Speed Sensor Replacement - Left Side

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the left rear speed sensor electrical connector (4).




3. Remove the left rear speed sensor.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the left rear speed sensor.

Tighten the speed sensor to 15 N.m (11 lb ft).




2. Connect the left rear speed sensor electrical connector (4).
3. Lower the vehicle.

pro multis · About Operation CHARM