Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Gear/Sprocket

Camshaft Sprocket bolts
First Pass tighten to 75 N.m (55 lb ft)
Final Pass tighten to 50 degrees

The camshaft sprocket alignment marks MUST be aligned properly.

Install the camshaft sprocket (205), timing chain (208), and bolt (206).

Inspect the sprockets for proper alignment. The mark on the camshaft sprocket (1) should be located in the 6 o'clock position.

Important:
^ The sprocket teeth and timing chain must mesh.