Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Liftgate Window Strut Replacement



LIFTGATE WINDOW STRUT REPLACEMENT

REMOVAL PROCEDURE

CAUTION: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

1. Open and support the liftgate window.

NOTE: Refer to Liftgate/Hood Assist Rod Notice.




2. Lift up the retainer clips on the liftgate window struts using a small flat-bladed tool.
3. Remove the upper end of the liftgate window struts from the ball joint.
4. Remove the lower end of the liftgate window struts from the ball joint.
5. Remove the liftgate window struts from the liftgate window.

INSTALLATION PROCEDURE




1. Position the liftgate window struts to the liftgate window.
2. Install the upper end of the liftgate window struts to the ball joint. Press in to place until fully seated.
3. Install the lower end of the liftgate window struts to the ball joint. Press in to place until fully seated.
4. Remove the support device from the liftgate window.
5. Close the liftgate window.