Automatic Door Locks Inoperative

Automatic Door Locks Inoperative

Diagnostic Fault Information

Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview

Circuit/System Description

Personalization features may be set for the vehicle or the driver. Vehicle features do not change with each driver. Specific drivers are recognized by the vehicle through the keyless entry transmitters, the memory buttons, or the driver information center (DIC), and the personalization settings for that driver are recalled.


Circuit/System Verification

Press the top and bottom of the door lock switch. All of the vehicle doors should lock and unlock

If one or more vehicle doors do not lock or unlock, refer to Power Door Locks Inoperative Power Door Locks Inoperative

Circuit/System Testing

Follow the DIC Vehicle Personalization instructions outlined in the owner’s manual.

If the personalization options cannot be set, replace the BCM

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests

Control Module References for BCM replacement, setup, and programming Programming and Relearning