Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2008 >> Aveo L4-1.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Service and Repair



Accelerator Pedal Position Sensor Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).




1. Disconnect the negative battery cable.
2. Disconnect the electronic throttle control (ETC) connector from the accelerator pedal.
3. Remove the 3 accelerator pedal retaining nuts.
4. Remove the accelerator pedal.


Installation Procedure




1. Position the accelerator pedal.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the 3 accelerator pedal retaining nuts.

Tighten the accelerator pedal retaining nuts to 19 N.m (14 lb ft).

3. Connect the ETC connector to the accelerator pedal.
4. Connect the negative battery cable.

pro multis · About Operation CHARM