Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2008 >> HHR L4-2.2L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Knock Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair



Knock Sensor Replacement

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Disconnect the knock sensor (KS) harness electrical connector (6).




3. Remove the KS bolt.
4. Remove the KS.



Installation Procedure





1. Install the KS.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the KS bolt.

Tighten the bolt to 25 N.m (18 lb ft).





3. Connect the KS harness electrical connector (6).
4. Lower the vehicle.


pro multis · About Operation CHARM