Torque Converter Cover: Service and Repair
Torque Converter Cover Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the torque converter cover bolts.
3. Remove the torque converter covers.
Installation Procedure
Important: If equipped with 5.3L V8-The tab must be on the engine side of the engine oil pan bolt.
1. Install the torque converter covers.
Notice: Refer to Fastener Notice .
2. Install the torque converter cover bolts.
Tighten the bolts to 10 N.m (89 lb in).
3. Lower the vehicle.