Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2008 >> Uplander V6-3.9L >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair >> Sit-N-Lift Remote Control Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Sit-N-Lift Remote Control Replacement



Sit-N-Lift Remote Control Replacement

Removal Procedure




1. Remove the right side upper trim panel from the seat base.
2. Disconnect the retainers holding the cable to the upper trim panel.
3. Remove the rear trim panel from the seat base.




4. Disconnect the electrical connector from the seat base.




5. Remove the remote control and the chord from the vehicle.

Installation Procedure




1. Install the remote control and the chord to the seat base.




2. Connect the electrical connector to the seat base.




3. Install the rear trim panel to the seat base.
4. Connect the retainers holding the cable to the upper trim panel.
5. Install the right side upper trim panel to the seat base.
6. Test the seat for proper operation.

pro multis · About Operation CHARM