Torque Converter: Service and Repair

Flywheel to Torque Converter Bolt Replacement

Tools Required
* J 37096 Flywheel Holder
* J 37623 10 1/2 Inch Pinion Bearing Remover

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Remove the torque converter cover. Refer to Torque Converter Cover Replacement (Service and Repair).




3. Use the J 37096 in order to rotate the flywheel and access the torque converter bolts.
4. Use the J 37096 to hold the flywheel.




5. Remove the flywheel to torque converter bolts.

Installation Procedure




1. Install the flywheel to torque converter bolts.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Use the J 37623 to hold the flywheel.

Tighten the bolts to 63 N.m (47 lb ft).




3. Install the torque converter cover. Refer to Torque Converter Cover Replacement (Service and Repair).
4. Lower the vehicle.